Business Products & Services

Plastic bag making machine problem solution in Dubai,Ajman,Umm al-Quwain,Abu Dhabi,Sharjah,Fujairah,United Arab Emirates 

Plastic Bag Machine is the final step in the manufacturing and processing of plastic bag. If the performance of bag making process isn’t high enough or the quantity of waste is excessive, the previous processes , such as blowing film machine or composite printing machine could end up being used up and downstream customers are likely to have an enormous effects on the manufacturing and operations.

1. What can I do if my bag’s contents leak or become damaged because of the insufficient sealant of the plastic bag machine?
Cause: Low anti-pollution heat-sealability for the film, mostly due to the resin that is used in the sealing layer isn’t suitable for.
Countermeasures: Select a film that has excellent anti-pollution heat-sealability. The general rule is that ldpe has moderate anti-pollution heating capacity. EVA is a good anti-pollution heat sealability in the event that the VA contents are large. Ionic resin and metallocene-based polymer It is extremely effective in preventing pollution heat-sealability.

2.What can I do when the seal of the plastic bag machine isn’t as strong?

Video of plastic bag machine

Reasons:

1. The temperature of heat sealing is excessively high.
2. The pressure is too high.
3. The time to seal heat is too long.
4. Edge of upper section of the sealer sharp or the PTFE coating is damaged.
5. The seal on the bottom is Silicone rubber that is too for the job;
6, in the process of compounding and curing during the curing and compounding process, a portion of the adhesive gets absorbed into the film. When the substrate is impacted by the adhesive. As a result, the hardness (that is, resistance to impact) has diminished and the brittleness grown;
7 Plastic composite baggies for packing Following cooling and putting in place the bags, the durability of the heat seal improves and the bag also begins to harden.

Countermeasures:

1. Based on the heat sealing properties of the outer sealing layer material, choose the right temperatures, pressure, and time to seal the heat;

2. Improve the surface quality of the top heat sealing knife so that it makes the sealer’s surface smooth;

3. Wrap the cloth with polyethylene. The wrapping is still intact.

4. Select a pad made of silicone that is of the right degree of hardness.

What can I do if my bag starts to shrink after being sealant by the bag maker?
The reason:
1. The film’s thickness is variable;
2. The temperature for heat sealing is too high, or the time to seal can be too lengthy.
3. In the heat sealing knife’s longitudinal section The running path of composite films isn’t straight.
4. Insufficient cooling.
5. The time for curing isn’t enough.
6. The film on the surface is not very resistant to heat.
7. Inadequate control of the tension-matching to the substrate of the composite during the process of compounding causes residual stress following curing and setting, particularly in cases where the composite film is smaller this type of failure is more likely to occur.
Countermeasure
1. The tension can be adjusted on the roller floating.
2. Utilize an inner sealing base material that has low temperature heat sealability.
3. Adjust the temperature of the heat seal to the appropriate temperature.
4. It is important to cool down.
5. Create a film that is mature.
6. Re-select the film on the surface.
7. Adjust the tension on each component of the composite processing equipment, and then try to ensure that both substrates shrink the same.

What can I do if I notice that the outer shape of the heat-sealed exterior of the bag-making machine isn’t clear after sealing? (The knife’s pattern isn’t evident)
The reason is:
1. The cooling process is short.
2. The cooling plate is not in good contact with the plate
3. When the pad of silicone is heated, the edges melt.
4. Forces of heat sealing in the longitudinal direction that are not balanced
5. Its edge on the heat sealing knife is sloping and blunt.
Countermeasure
1. Set the cooling time.
2. Adjust the cooling plate to your liking.
3. Adjust or replace the knife that seals heat
4. Avoid melting at the edge due to overheating of the silicon pad.

What can I do if the sealing capacity of the bag maker is weak after sealing?
the reasonfor this:
1. The adhesive contained in the composite film hasn’t been properly cured.
2. The conditions for heat sealing are not appropriate.
3. Between the knife that seals the temperature and the cooling knife is too long.
4. There is an issue with the inner layer of sealing.
5. The ink’s heat-sealability is weak, resulting in a reduction in the strength of composites of the film in the sealed part.
6. Dust and spray powders as well as other substances stick on the cover.
7. The strength of the composite is not high or the strength of the heat sealed place decreases too much.

Countermeasures:
1. Help to promote the hardening process of adhesive (curing or curing) by preserving heat and aging. This will improve the strength and resistance to heat of the film.
2. Find the ideal conditions for heat-sealing (temperature as well as time and pressure) in accordance with the structure of the material, its heat-sealing state and so on. Or, you can enhance the method of heat-sealing, and then cool down right away after the heat-sealing process.
3. Examine the shelf time and storage conditions of the film that is heat-sealable. If the film is made of the film from the previous batch and also the film has been sealed with heat requires special attention, it is recommended to do so.
4. The thickness of the film that can be heat-sealable.
5. Modify the type and the grade of the film that can be heat-sealable and choose a film that has anti-pollution heat-sealability.
6. Verify that the quality of the adhesive meets standards (the release of low-molecular substances in the resin can alter how the glue is made)
7. Improve the heat sealing efficiency in the layers of heat. regulate the contents of the slip agents and utilize the mlldpe film.
8. Monitor the monomer concentration in MDI within the composite adhesive.

What can I do if the formation of air bubbles, or uneven surface are found in the heat-sealed area of the bag-making machine?
The reason:
1. When heat-sealing is applied to an object made up of hygroscopic material like nylon film the hygroscopic film can create air bubbles after it is absorbed by moisture.
2. The heat-sealing blade or pad of silicone is not even.
3. Insufficient pressure for heat sealing.
4. One-component adhesives, like neoprene adhesives when sealing bags with heat are used, the heat cover can be prone to pits.
Countermeasures:
1. Make sure to store the semi-finished and raw materials in a proper manner to prevent the absorption of moisture.
2. Make sure to adjust or test or adjust the knife for heat sealing as needed and the heat sealing pad.
3. Remove the tape.

If you need any information of blown fim extrusion,plastic bag machine,printing machine,please feel free to contact us. Kingdom Machine Factory  Mobile:0086-13088651008;0086-13958812663;
Whatsapp/Viber/Tango:0086-13088651008;0086-13958812663;
sale@kingdommachine.com;kingdombillwang@hotmail.com; www.blownfilmextrusion.com; www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China

Semi Truck Repair Service Solution: Keeping the Tires Switching

In today’s fast-paced logistics and transport field, the relevance of reliable semi vehicle fixing solutions can not be overstated. A properly maintained semi vehicle is crucial not just for the effectiveness of operations yet likewise for the safety of the driver and others when driving. Whether you are an owner-operator or taking care of a fleet, understanding the benefits of high quality fixing services can save you time, money, and frustrations down the road.

One of the main advantages of using professional semi vehicle repair solutions is the knowledge they provide. Experienced auto mechanics possess the technological expertise and skills required to detect and take care of a wide range of concerns, from engine malfunctions to brake issues and electrical failings. Their familiarity with various truck designs and their particular requirements makes certain that fixings are done right the very first time, lowering the threat of future break downs.

In addition, prompt repair services can substantially enhance the lifespan of your semi truck. Normal maintenance and prompt interest to minor issues can assist protect against major problems that could lead to pricey repairs and even crashes. A respectable repair solution will likewise provide routine examinations and efficiency evaluations, guaranteeing that your lorry continues to be in optimum problem and adhere to safety regulations.

One more important aspect to think about is the access of semi truck fixing solutions. Many service facilities use 24/7 assistance, which is vital for vehicle drivers that operate on limited timetables. Recognizing that expert help is readily available at any kind of hour can supply assurance, especially when managing unanticipated breakdowns. Furthermore, mobile fixing services are ending up being significantly popular, bringing the proficiency right to your location, reducing downtime and obtaining you back when traveling promptly.

Finally, buying a dependable semi truck repair work solution is crucial for any trucking service. From specialist diagnostics and fixings to preventative maintenance and 24/7 assistance, these solutions play a vital function in making sure that vehicles run efficiently and safely. By prioritizing the upkeep of your lorries, you not just secure your financial investment yet likewise contribute to smoother logistics, eventually improving your organization operations.

Lessons Learned About

Getting Down To Basics with

bubble film machine is scientific and reasonable structure design, smooth and reliable running and convenient operation and maintenance. Polyethylene air-cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene air-cushion film and composite polyethylene air-cushion film, is a kind of packing material which has been widely used at present. It not only has good cushioning effect, shock resistance and heat-sealing performance, but also has such advantages as good corrosion resistance and transparency , etc. So it has been widely used for packing, household wares, post parcel, bicycle , polyurethane furniture, etc.1.This air bubble film machine’s aircrew adopts the disposable shaping craft. 

1.This bubble film machine‘s aircrew adopts the disposable shaping craft. 
2.The air bubble film machine is our factory that draws demotic and international advanced technology extensively, through a large number of production practic eses in having ordinary equipment originally, develop, designing,can produced polyethylene compound bubble(cushion) membrane in succession.
3.Designs science, practical. Rational in structure of the air bubble film machine.
4.The main machine and the composite parts can realize ganged frequency-converting.
The frequency converting is stable and accurate. The temperature control adopts PID intelligent temperature control.It is energy saving ,environmental and aureate.The composite parts can adjust pneumatic control which can saves a lot of time and efforts.

Model: KDPEG-1000 KDPEG-1200 KDPEG-1500 KDPEG-2000;
Main&minor Screw Dia.: 60mm/50mm 65mm/55mm 85mm/65mm 95mm/70mm;
Film width: 1000mm 1200mm 1500mm 2000mm;
Output: 120kg/h 160kg/h 180kg/h 250kg/h;
Total power: 75kw 95kw 120kw 165kw;
L/D: 28:1 28:1 28:1 28:1;
Linear speed: 1100m/hour 1100m/hour 1100m/hour 1100m/hour;
Weight: 5T 6T 7T 9T;

Kingdom Machine co,ltd
Mobile:0086-1358812663; 0086-13088651008;
Whatsapp/Viber/tango:+86-13958812663;  
Tel.:0086-577-66881211; Fax:0086-577-66881311;
sale@kingdommachine.com; Kingdombillwang@hotmail.com;
Skype:kingdombillwang
www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China